Lost password ? Create account

Main menu

Registration

Program

HELP

@ Contact

Program

Week Wed. 02 Thu. 03 Fri. 04 List

Wednesday, November 2, 2022 ›

08:00

09:00

10:00

11:00

12:00

13:00

14:00

15:00

16:00

›8:30 (30min)

Registration

8:30 - 9:00 (30min)

Registration

Take your badge at the venue entrance !

›9:00 (1h30)

Opening session - Fairybank Auditorium

9:00 - 10:30 (1h30)

Opening session - Fairybank Auditorium

Introduction speech - François Trigaux and Dominik Fallais (15 mns) | Opening keynote - President of EAWE - Athanasios Kolios (45 mns)

›10:30 (30min)

Coffee break

› Foyer

10:30 - 11:00 (30min)

Coffee break

Foyer

›11:00 (1h30)

Wind farms and wakes
Thuy-Hai Nguyen

› Fairybank Auditorium

11:00 - 12:30 (1h30)

Wind farms and wakes

Fairybank Auditorium

Thuy-Hai Nguyen

› Comparison of generalized actuator disk and actuator line wind turbine models for varying atmospheric conditions - Baris Kale, Environmental and Applied Fluid Dynamics Department, von Karman Institute for Fluid Dynamics, Rhode-Saint-Genèse, DAVE/UPM, E.T.S.I. Aeronáutica y del Espacio, Universidad Politécnica de Madrid, E-28040 Madrid 11:00-11:15 (15min)

› convective atmospheric boundary layer using LES - ulysse vigny, University of Mons [Belgium], Complexe de recherche interprofessionnel en aérothermochimie 11:15-11:30 (15min)

› Coupling an atmospheric perturbation model to a wake-merging method to include meso-scale perturbations - Koen Devesse, Department of Mechanical Engineering, KU Leuven, Celestijnenlaan 300A, 3001 Leuven 11:30-11:45 (15min)

› An open-source operational dynamic wake modelingframework - Maxime Lejeune, Institute of Mechanics, Materials and Civil Engineering [Louvain] 11:45-12:00 (15min)

› Effect of data assimilation of local observations in WRF on the predictability of atmospheric variables for offshore wind energy applications - Tsvetelina Ivanova, von Karman Institute 12:00-12:15 (15min)

› Mesoscale modelling of offshore wind farm wakes over the North Sea for different turbine densities. - Ruben Borgers, KU Leuven, department of Earth and Environmental Sciences 12:15-12:30 (15min)

›11:00 (1h30)

Turbine technology and control
Thomas De Kerf

› Green Jade room

11:00 - 12:30 (1h30)

Turbine technology and control

Green Jade room

Thomas De Kerf

› A Force Partitioned Approach for Numerical Analysis of Vortex-Induced Vibrations on Wind Turbine Towers - Shyam VimalKumar, TU Delft, Politecnico di Milano 11:00-11:15 (15min)

› A Self-Similarity scaling for Integral Boundary Layer analysis of Vortex Generators - Abhratej Sahoo, Technische Universiteit Delft, The Netherlands Organisation for Applied Scientific Research 11:15-11:30 (15min)

› Active Trailing Edge Flap on a 4.3 MW wind turbine: characterization and aeroelastic modeling of a pneumatic flap actuator - Andrea Gamberini, DTU Wind Energy, Siemens Gamesa Renewable Energy 11:30-11:45 (15min)

› Comparison of different wind farm control strategies in a quasi-static closed-loop control framework - 11:45-12:00 (15min)

› Decentralized Q-learning for Wind Farm Control under Dynamic Conditions - 12:00-12:15 (15min)

›11:00 (1h30)

Reliability, monitoring and sensing technology
Domink Fallais

› Seamade room

11:00 - 12:30 (1h30)

Reliability, monitoring and sensing technology

Seamade room

Domink Fallais

› Long-term damage effect of low-frequency loads of offshore wind turbines using SHM data - 11:00-11:15 (15min)

› Model Updating for damage localisation and quantification using a deterministic optimiser and a damage distribution function - 11:15-11:30 (15min)

› Fleet-wide model updating and virtual sensing for fatigue monitoring of offshore wind turbines - 11:30-11:45 (15min)

› Budget constrained modelling for the reliability assessment of offshore wind substructures under accidental impact events - Jonathan Moran, Pablo G. Morato, Philippe Rigo 11:45-12:00 (15min)

› System Structural Reliability Modelling for Offshore Wind Welded Connections - Jose Mishael, Departement Architecture, Géologie, Environnement et Constructions - ArGEnCo (Liège, Belgium) 12:00-12:15 (15min)

› A Novel Approach for Constructing Health Indicators for Degrading Wind Turbine Components - 12:15-12:30 (15min)

›11:00 (1h30)

Electrical conversion, energy system and wind power-to-X
Younes Oudich

› Northwester 2 room

11:00 - 12:30 (1h30)

Electrical conversion, energy system and wind power-to-X

Northwester 2 room

Younes Oudich

› Advance Generative Model for Scenario Generation of Wind Power Distributions With Hight Granularity - Ahmad Hosseini, UMONS 11:00-11:15 (15min)

› Comparison of Hybrid Wind Power Plant Sizing Optimization Methods - Charbel Assaad, DTU Wind 11:15-11:30 (15min)

› Increasing the Magnetic Permeability of Wind Turbine Generator Air-gaps - Fergus Hall, University of Edinburgh 11:30-11:45 (15min)

› Machine Learning-based Methodologies for Grid Compliance Assessment of Wind Turbines and Farms - Gabriel Miguel Gomes Guerreiro, Siemens Gamesa Renewable Energy, DTU Wind and Energy Systems 11:45-12:00 (15min)

› Stability enhancement of weakly-connected offshore wind power plants by wind turbines with grid-forming converter control - Sulav Ghimire, Siemens Gamesa Renewable Energy A/S, DTU Wind and Energy Systems [Lyngby] 12:00-12:15 (15min)

› Wind Farm and Hydrogen Storage Co-location System for Frequency Response Provision in the UK - Shanay Skellern, University of Strathclyde 12:15-12:30 (15min)

›11:00 (1h15)

Emerging technologies and special sessions
Ivandito Herdayanditya

› Belwind room

11:00 - 12:15 (1h15)

Emerging technologies and special sessions

Belwind room

Ivandito Herdayanditya

› Analysis of stresses in a wind turbine composite adhesive using CT Scans and Deep Learning. - 11:00-11:15 (15min)

› High fidelity fluid-structure interaction simulation of a multi-megawatt airborne wind energy reference system in cross-wind flight - 11:15-11:30 (15min)

› Modelling and control of Airborne Wind Energy Systems using lifting line/surface aerodynamics - 11:30-11:45 (15min)

› Multi-objective substructure generation - 11:45-12:00 (15min)

› Multidisciplinary Design, Analysis and Optimization of fixed wing Airborne Wind Energy Systems - 12:00-12:15 (15min)

›12:30 (1h)

Lunch

› Foyer

12:30 - 13:30 (1h)

Lunch

Foyer

›13:30 (1h30)

Wind farms and wakes
François Trigaux

› Green Jade room

13:30 - 15:00 (1h30)

Wind farms and wakes

Green Jade room

François Trigaux

› Actuator Line Model development in Nek5000 for wind turbine wake simulation in Large Eddy Simulation - emmanuel gillyns, von Karman Institute for Fluid Dynamics 13:30-13:45 (15min)

› Aeroelastic simulations of wind turbines in an atmospheric boundary layer using a flexible actuator curve method - Francois Trigaux, UCLouvain (BE) 13:45-14:00 (15min)

› Calibrating the actuator line model in the large eddy simulation solver YALES2 - Anand Parinam, TU Delft 14:00-14:15 (15min)

› Modelling of ice throw from wind turbines: a case study - Kim Janovski, Department of Electronic and Electrical Engineering [Strathclyde] 14:15-14:30 (15min)

› Study of wave effects on the wind turbine aerodynamics with large-eddy simulation in sigma coordinates - 14:30-14:45 (15min)

›13:30 (1h30)

Reliability, monitoring and sensing technology
Thomas De Kerf

› Seamade room

13:30 - 15:00 (1h30)

Reliability, monitoring and sensing technology

Seamade room

Thomas De Kerf

› Temperature Influence on Structural Health Monitoring Systems - Jan-Hauke Bartels, Institute of Concrete Structures, Technische Universität Dresden 13:30-13:45 (15min)

› Grey-box modeling for data-based structural health monitoring - Sören Möller, Leibniz University Hannover, Institute of Structural Analysis 13:45-14:00 (15min)

› Optical imaging methods to detect corrosion in offshore wind turbines - Thomas De Kerf, University of Antwerp 14:00-14:15 (15min)

› Monitoring blade leading edge erosion with Graph Neural Networks and aerodynamic data - Gregory Duthé, ETH Zurich 14:15-14:30 (15min)

› Wind Turbine Blade Defect Detection using Fibre Bragg Grating Distributed Sensing - Aananthalakshmy Sihivahana Sarma, University of Hull [United Kingdom] 14:30-14:45 (15min)

›13:30 (1h30)

Support structures and geotechnics
Nandar Hlaing

› Belwind room

13:30 - 15:00 (1h30)

Support structures and geotechnics

Belwind room

Nandar Hlaing

› Simplified frequency domain analysis for jacket structures - 13:30-13:45 (15min)

› Geological considerations for offshore wind foundations at “Sørlige Nordsjø II”, Norwegian North Sea - Hannah Petrie, University of Bergen 13:45-14:00 (15min)

› The Effect of Varying Soil Properties on the Probability of Unsatisfactory Performance of Offshore Monopile Foundations - 14:00-14:15 (15min)

› Sensitivity of Monopile Response to Scour: a laboratory case study - Adelmo Fernandes de Oliveira Junior, Offshore Wind Infrastructure-lab (OWI-lab) / Vrije Universiteit Brussel (VUB) 14:15-14:30 (15min)

› Analysis of discrepancy between modelled and measured natural eigenfrequencies of offshore wind turbines - Kristof Winkler, Vrije Universiteit Brussel [Bruxelles] 14:30-14:45 (15min)

› A comparison between a simplified fatigue damage estimation and a standard method for an offshore VAWT support structure - Adriana Correia da Silva, Department of Civil and Environmental Engineering, Norwegian University of Science and Technology 14:45-15:00 (15min)

›13:30 (1h30)

Other topics

Northwester 2 room

Angelo Goethals

› Description of the methodology for quantifying geometrically non-linear cross-sectional deformations of rotor blades - Julia Gebauer, Leibniz University Hannover, Institute for Wind Energy Systems, Appelstr. 9A, 30167 Hannover 13:30-13:45 (15min)

› Are performance losses of iced wind turbine blades due to ice shape or surface roughness? - Francesco Caccia, Politecnico di Milano [Milan] 13:45-14:00 (15min)

› Experimental investigation of failure mechanism in cross-ply curved composite laminates under transverse loading - Ahmet Cevik, Department of Aerospace Engineering, Middle East Technical University 14:00-14:15 (15min)

› UVLM-based aeroelastic simulation of large wind turbines - Daniel Schuster, Leibniz University Hannover, Institute for Structural Analysis, ForWind 14:15-14:30 (15min)

› On the use of the Actuator Line Method to simulate the performance of twin Darrieus turbines - Omar Mohamed, university of florence 14:30-14:45 (15min)

› Numerical investigation of impact-induced damage progression in composite wind turbine blade structures - Onur Ali Batmaz, Department of Aerospace Engineering, Middle East Technical University, Ankara, METUWind, Center for Wind Energy, Middle East Technical University, Ankara 14:45-15:00 (15min)

›15:00 (30min)

Coffee break

› Foyer

15:00 - 15:30 (30min)

Coffee break

Foyer

›15:30 (1h15)

Support structures and geotechnics
Nandar Hlaing

› Belwind room

15:30 - 16:45 (1h15)

Support structures and geotechnics

Belwind room

Nandar Hlaing

› Development of a database of offshore substructures for evaluating and prognosing the design quality of the structures using machine learning methods - Han Qian, Institute of Concrete Structures, Technische Universität Dresden, CRC 1463 15:30-15:45 (15min)

› A Numerical Investigation on the Pitting Corrosion in Offshore Wind Turbine Sub-structures - 15:45-16:00 (15min)

› Numerical study on the effect of pitting corrosion on the fatigue strength degradation of offshore wind turbine sub-structures using a short crack model - Seyed Ahmad Elahi, Department of EMSME, Laboratory Soete, Faculty of Engineering and Architecture, Ghent University, Technologiepark 46, BE-9052, Zwijnaarde 16:00-16:15 (15min)

› Current and wave patterns in the nearfield of an offshore jacket structure - 16:15-16:30 (15min)

› Development of Bluff Body Benchmark at high Reynolds numbers - Sophie Breitkopf, TU Dortmund University - Aljoscha Sander, Bremen University 16:30-16:45 (15min)

›15:30 (15min)

Wind farms and wakes
Younes Oudich

› Green Jade room

15:30 - 15:45 (15min)

Wind farms and wakes

Green Jade room

Younes Oudich

› The role of the turbulence cascade in wind energy applications - Felix Schmitt, Felix Schmitt 15:30-15:45 (15min)

›15:30 (1h15)

Production, O&M, decommissioning and lifetime extension
Ivandito Herdayanditya

› Seamade room

15:30 - 16:45 (1h15)

Production, O&M, decommissioning and lifetime extension

Seamade room

Ivandito Herdayanditya

› Circular Supply Chain Management for the German Wind Energy Industry - Kathrin Julia Kramer, Institute of Product and Process Innovation (PPI), Leuphana University 15:30-15:45 (15min)

› Physical and Analytical Modelling of a Crane Vessel for Offshore Installation Processes - Jannik Meyer, Ludwig-Franzius-Institute for Hydraulic, Estuarine and Coastal Engineering, University of Hannover, Nienburger Straße 4, D-30167 Hannover 15:45-16:00 (15min)

› Runup under Waves and Current to Improve Offshore Wind Marine Operations - Ivandito Herdayanditya, Maritime Technology Division, Ghent University, Department of Civil Engineering, KU Leuven, Bruges 16:00-16:15 (15min)

› Leading edge erosion of wind turbine blades, lifetime and roughness modelling for coatings - Antonios Tempelis, DTU Wind and Energy Systems 16:15-16:30 (15min)

› Predicting the Mechanical Performance of Composite Materials and Sub-components for Wind Turbine Blades Through Manufacturing Modelling - Jesper Kjær Jørgensen, Technical University of Denmark 16:30-16:45 (15min)

›15:30 (15min)